Based on the Sweeper and Sweeper-HG models, the Sweeper-AL is a bespoke system enabling you to order the system you need: two waist-height glass blades or two full-height glass blades or one of each. Also there is plenty of space for additional equipment such as access control systems or identification devices, which can be situated at the start and in the middle of the whole system. Also, additional post or holder for identification devices (IRIS reader, finger-print, face-recognition etc) can be ordered. It can be single-passage only or multi-passage. Sweeper-AL pedestrian turnstile gate is ideally suited for use at different airports.
When power goes OFF both directions are free.
SWEEPER – AL
Advantages
- Sweeper-AL equipped with sensors that allows to detect tailgang
- Ultra quite direct drive unit
- Successful combinaon of affordable price and high quality
- Customized surface finish and top lid
- Steadfast housing suitable for high traffic areas
- Soluon for disabled and trolley access
- Can be integrated with any type of access control systems
- Low power consumpon
- Low noise system operaon
- Can be mounted on a mobile plaorm (TiSO Frame-M)
Specifications
for each pass
one side
Product downloads
Specification
Unit dimensions (WxLxH), mm | Single pass (550) – 950x2947x1000 Two pass (550+550) – 1700x2947x1000 |
|
Passage width, mm | 550 | 900 |
Crossing capacity in single access mode, person/min | 30 | 30 |
Opening/Closing, sec | 1,0 | 1,0 |
Mechanism | Motorized | |
Standard housing | Brushed AISI 304 | |
Available housing | Brushed SS AISI 316 Polished SS AISI 304 Polished SS AISI 316 Powder coated RAL |
|
Top lid | Black glass | |
Voltage | from the AC (100–240) V, 50/60 Hz from a DC source 12 V |
|
Maximum power consumption, W/pass | 155 | |
MCBF, cycles | 1 500 000 | |
Enclosure rating | IP41 | |
Temperature range, °С | +1 / +40 |
Datasheet
Drawings
TiSO BIM models are available from BimObject or the NBS National BIM Library.