TiSO traffic semi-automatic bollards are a perfect solution for effective vehicle access control a power supply is unavailable. The semi-automatic bollards have an inbuilt gas spring mechanism which is locked in the retracted position and rise rapidly when released. For easier use the semi-automatic TiSO drill drive bollards are designed for use where a power supply is unavailable. Operation of the bollard is via a battery drill to raise or lower the bollard. A complete and independent solution the semi-automatic bollards require manual operation for opening or closing. Generally installed in a controlled area operation is provided by on site staff involved to manage any access. Ideally used in areas where parking or traffic restrictions are required such as private driveways or for restricting access to vehicle traffic.

Request a quote


    Advantages

    • Traffic management;
    • Traffic calming and safety;
    • Security for building and infrastructure;
    • Prevent mounting the curb;
    • Pedestrian safety;

    Specifications

    Product downloads

    Specification

    Technical specs*:
    Model RB343-60 RB343-61 RB343-63 RB343-64
    Drive Gas-spring
    Tube diameter, mm 220 273 220 273
    Tube height, mm 600 800
    Foundation case dimensions (AxBxC), mm
    • with lowered anchors
    • with raised anchors
    330x380x878
    671x721x878
    374x413x878
    715x754x878
    330x380x1078
    671x721x1078
    374x413x1078
    715x754x1078
    Operating temperature**, °C -40 /+60
    Tube materials – Brushed stainless steel AISI 304
    – Brushed stainless steel AISI 316
    – Galvanized and powder coated tube (any RAL up on request)
    * technical data is subject to change without notice
    ** for temperatures lower than -10 °C use the heating device; for temperatures higher than +40 °C use the cooler device

    Specification

    Technical specs*:
    Model RB343-03 RB343-01 RB343-02 RB343-06 RB343-04 RB343-05
    Drive Screw pair
    Tube diameter, mm 114 220 273 114 220 273
    Tube height, mm 600 800
    Foundation case dimensions (AxBxC), mm
    • with lowered anchors
    • with raised anchors
    270x310x878
    610x650x878
    330x380x878
    671x721x878
    374x413x878
    715x754x878
    270x310x1078
    610x650x1078
    330x380x1078
    671x721x1078
    374x413x1078
    715x754x1078
    Operating temperature**, °C -40 /+60
    Tube materials – Brushed stainless steel AISI 304,br />- Brushed stainless steel AISI 316
    – Galvanized and powder coated tube (any RAL up on request)
    * technical data is subject to change without notice
    ** for temperatures lower than -10 °C use the heating device; for temperatures higher than +40 °C use the cooler device

    Datasheet

    Drawings

    Manual

    Make an enquiry